落球回弹试验仪,介电击穿强度测定仪

ASTMD495耐高压低电流电弧放电试验机

ASTMD495耐高压低电流电弧放电试验机

日期:2025-11-16 03:15
浏览次数:2194
摘要:
ASTMD495耐高压低电流电弧放电试验机

高额定电压小感应电流经过多次实验发现仪(耐电弧焊接经过多次实验发现仪)-(换算机的控制)

High voltage low current tester (arc resistance tester) - (computer control)

食商品编码称:耐电弧试验机

Product name: electric arc resistance tester

货品形号:NDH-A

Product model: NDH - A

达到原则:GB/T 1411-2002《无水硫酸铜隔绝材质耐高压得过低电压弧光蓄电池充电的经过多次实验发现》(相等IEC  61621-1997)及ASTM D495等标准的的耍求设计的概念制造技术的,并符合国家IEC 149、UL 746A等试验检测方式

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

重点常用的范围及基本功能:

本检验机是按APP于电动机、电气和家庭用的电气等餐饮行业的安装电工用塑料管件、不饱和树脂材料胶和耐压漆等耐压建筑涂料的耐电孤功效评审,主中用固状耐压建筑涂料如:塑料管件、聚酯薄膜、不饱和树脂材料、矿石、陶瓷图片、破璃、耐压油、耐压漆、纸箱等媒介的耐电孤功效测试方法;

本试验报告机由计算出来机设定正常运行,应该提示某个工作进行实践所室的情况及进行实践所室准确时间,进行实践所室结束了后并上传某个工作进行实践所室数值,并可彩打.准则试验报告格式。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 该设备为前后三合一结构特征,底端为作业机系统,上方为冲击恒温恒湿试验箱。

2 本产品设备用于*新自动化的控制的技术,能够 会选择程序流程图(IEC或ASTM)可系统自动实行耐压试验,并在笔记本电脑上微信显现实验设计具体步骤和結果。

3 **功能健康,抗骚扰效率强,测评定位精性高。

二:Functional features:

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 电孤通断用时精度:需小于 ±10ms

2 调压器余量:2kVA

3 功率应力测试线电压:12.5kV

4 校正线电压准确度:±3%

5 电流量控制定位精度:±10%  直流电测定控制精度:1.5%

6 参比电极对钢材拉伸试验工作压力:(0.5±0.05)N

7 电极片建材:钨棒

8 工业距離:(6.35±0.1)mm(IEC)

               (6.0±0.1)mm(ASTM)

9 用到室内环境温湿度:(23±2)℃

10 运用周围环境室内温度:(50±5)%

11 电:220V±5%  50Hz  10A

12 试验报告    措施:   国际标准/美标/10 mA 连续不断/20 mA 连着/30 mA持续/40 mA间断性

13 检验方式给出:

源程序段

电弧焊接电压电流

mA

弧光通断事件s

各程序代码段坚持耗时s

实验设计总日期s

 

 

IEC 61621

ASTM D495

 

 

1

10

1/8s通 7/8s断

1/4s通 7/4s断

60

60

2

10

1/4s通 3/4s断

1/4s通 3/4s断

60

120

3

10

1/4s通 1/4s断

1/4s通 1/4s断

60

180

4

10

联续通

60

240

5

20

连着通

60

300

6

30

间隔通

60

360

7

40

连继通

60

420

Three main technical parameters:

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

项目编号

称呼

次数

备注栏

01

耐电弧焊接测试图片仪

一款

 

02

电极材料系统

设计一套

 

03

电极材料支架

一套套

 

04

电源线低压电缆

两套

 

05

接地系统放**

每支

 

06

工作电流毫安表

一架

 

07

PC测控PC软件

一个

 

08

岩样架

一支队伍

 

09

参比电极长度的标准块

2块

 

10

偏角规则块

2块

 

11

陶瓷制品片

2片

 

12

喷墨直接万能平板打印机

1台

品脾

13

计算公式机

1台

企业

14

动用阐明书

1份

 

15

合格率证

1份

 

 

Four configuration:

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 新产品材质:

NDH-A    耐焊弧检测仪-微机的控制

NDH-B    耐脉冲经过多次实验发现仪-摸屏把控

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!

落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪